Got static? Are you experiencing product failures or machine down-time due to static electricity? Let Braas Company eliminate your worries with SMC's IZS31 Ionizer Series which removes static electricity with a discharge time of 0.3 seconds!

In this Series, the controlled ion balance by sensor offers two types: The rapid elimination of static electricity by a feedback sensor or the Ion balance control by an auto-balance sensor. The IZS31 continuously emits ions in accordance with the voltage present at the work piece.

Static electricity elimination mode by application and its features:

1. Sensing DC mode - Detects the charged voltage amount by a feedback sensor, emitting ions with reversed polarity to charged objects. Suited for a rapid elimination of a work piece with a higher amount of charged voltage.

• Continuous static electricity removal run mode: Continuously eliminates static electricty with pulse DC by controlling the ion balance so that the charged potential on a work piece would be within ±30 V after completing the static electricity removal.
• Energy saving run mode: Automatically stops emitting electricity after completing the static electricity removal.

2. Pulse DC mode (operable even when a sensor is not used) - Automatically adjusts the ion balance by an auto-balance sensor. Suitable for eliminating static electricity in space, and preventing a work piece from being charged.

• Ion balance automatic adjustment: The auto-balance sensor detects the ion balance to adjust the ion balance automatically. The ion balance is not affected by the height of an ionizer by positioning an auto-balance sensor near a work piece.
• Selection of a wide range of frequency: Frequency is selectable from 1 Hz to 60 Hz.

3. DC mode - Makes the positive / negative ion generated.

• Suitable for a work piece whose charged polarity is predetermined, running at faster speed or for eliminating static electricity roughly out of a work piece.
• Possible to make a work piece charged intentionally in such a static electricity painting.
• NOTE: Please take measures such as an earthing since there is a possibility of facilities other than a work piece being charged unintentionally.

Introducing the Ionizer Nozzle Type

This slim and sleek design will fit into tight spaces, only 16mm wide! Easy to maintain and several mounting options, you can even stack several Ionizer nozzles and adjust them in various positions! Endless posibilites, select your type of nozzle for short or long range to; eliminiate static from an electric substrate, lens, packing films, molded goods, plastic cups, or part feeder. Increases ion flow volume by air stream. Static electricity elimination is possible with minimal air consumption.

Demo of the single nozzle Ionizer video

Description of demo: Both containers are filled with a similar quantity of styrofoam pellets. Equivalent amounts of air are blown vertically through the container from bottom to top. The non-ionizer air is on the left and shows what static electricity might do in this process. The ionized air used on the right shows a much different result.

Contact your Braas Company Sales Represnative to find out more or for a demonstration today! 800.288.6628